Case Erectors are suitable to erect "American" style cardboard cases with closure of the bottom flaps by means of Hot-melt glue (376/C) or adhesive tape (376/N).

Features:

The adjustment of the case storage bin is done by manual hand-wheels mounted on an endless screw gearbox with check points on millimetred rules.

Multi-functions carriage (picking, opening, closure of short lower flaps, case transfer with automatic system for glue distribution) electromechanically controlled, motorization controlled by inverter, positions controlled by encoder.

Horizontal case handling.

Quick and easy changeover.

All devices to control case presence in the magazine, case presence during transfer, overflow at out-feed.

Electrical circuit and centralized control panel.

PLC Siemens.

Machine complying with EC rules.

Machine suitable to erect "American" style cardboard cases with closure of the bottom flaps by means of Hot-melt glue.

Features:

Fixed case storage mounted on the mid-back side of the machine.

Case pick-up from the magazine by means of suckers.

Case transfer - flat position, opening, glue dispensing, case unloading - by a transfer carriage fitted on a ball race gate system.

Suckers positioning and lift for the blockage of the case bottom.

Case opening by a pantograph system.

Folding of the two short flaps and their automatic keeping.

Automatic glue distribution during case passage operated by electromagnetic sensors.

Device to block the case bottom during case opening. This is to allow the case opening even when - in the inside - there are some drops of glue.

Automatic case squaring during case pressing.

Closure of the two long flaps and bottom pressing, electro-pneumatically controlled.

Magazine adjustments by means of hand-wheels, steel rules, setting numbers of all the parts to be adjusted.

Display to control machine functions, changeovers and to diagnostic possible anomalies.

Electro-pump on the suckers that pick-up the cases from the magazine, on those that keep the bottom part and on those that open the case. All these have separate controls.

Centralized control panel.

Inverter to adjust cycle speed.

S7 Siemens PLC.

Machine complying with EC rules.

Machine suitable to erect “American” type cases with closure of the bottom by Hot-Melt glue.

Features:

Case holder magazine adjustable to various sizes.

Case pick-up by a depression air system.

An electro-pneumatic system, picks-up the case from the magazine, opens it and transfers it to the glue distribution area.

Case advancement electromechanically moved with positioning controlled by Encoder and speed controlled by Inverter.

Automatic closure of bottom short flaps.

Case squaring device electro-pneumatically controlled.

Closure of the long bottom flaps and maintenance during the automatic pressure.

The glue distribution is done only when machine is moving and at case presence.

Bottom pressure group electro-pneumatically controlled.

Device to control case presence in the store, during translation and overflow at the out-feed.

Machine complete of the electrical installation, with a centralized control panel and safety guards.

Machine completely controlled by PLC Siemens.

Air consumption: 150 NL/1’.