Features:

The machine, as per the program and per the equipments installed, can handle different divisions types.

Divisions magazine with pitch-to-pitch movement, installed at the case conveyor top.

A carriage with suckers, picks-up, opens and inserts the card-board divisions into the case (this system allows to keep the division well squared up to its introduction into the case). Cases with bottles will have to be turned in advance on the case conveyor.

Perimetral centering basket, adjustable, to open top flaps and to position the case.

Motorized conveyor to feed cases to the machine, to position them into the divisions packing area and to unload cases after division insertion.

90° case turning device to install on the case conveyor at machine in-feed and out-feed.

Machine complete of control devices and controlled by PLC Siemens.

Display to control machine functions, the changeover and to diagnostic possible anomalies.

Machine complying with EC rules.

Features:

Division magazine with pitch-to-pitch transfer.

An automatic device compensates the difference in thickness between the centre and the ends of the divisions.

A head with suckers cup, moved by two controlled axes, picks, opens and inserts the divisions into the case. This system allows the divisions to be kept steady and well squared until they are released into the case.

A centering basket with automatic control allows an easy insertion of the division into the case.


Machine equipped with all the checking devices and completely managed by a PLC.

Display to control machine functions, change over and possible anomalies.

Machine complying with EC rules.

Machine suitable to pick-up, open and insert automatically cardboard divisions into cases. The machine can handle one 12 pack cardboard division or two 6 pack cardboard divisions at the same time.

Features:

The machine can handle different types of divisions.

Divisions magazine adjustable to different divisions sizes, constituted by a motorized conveyor with stainless steel frame, adjustable guides; acetal plastic double conveyor, with a pitch-to-pitch movement, managed by the operator as per division thickness.

Two pushers operated by two springs extensions keep the divisions pack close on the magazine.

Two photocells signal, when free, the minimum stock of divisions in the magazine. The machine continues the cycle for the number of cycles established by the operator then stops. After divisions loading, when the photocell is covered again, the machine restart automatically the cycle. The signal is visual and sounding.

An electro-pneumatically controlled signal compensates the difference of thickness between the center and the ends of the divisions.

A carriage with suckers picks-up, opens and inserts divisions into cases (this system keeps the division well squared up to its insertion into the case). Carriage movement on two controlled axes, vertical and horizontal, electromechanically controlled with two motorizations (vertical axe controlled by inverter, horizontal axe with a fixed speed). Positions controlled by electromagnetic sensors.

Suckers controlled by Venturi.

Divisions opening system electro-pneumatically controlled. Opening check electronically controlled.

Centering basket to center the case and to keep the top flaps opened with a vertical movement mechanically controlled, integral to the vertical axe movement of the carriage with suckers (necessary only when the division is inserted before bottles).

A motorized case conveyor, with case selection systems, feeds the case to the machine, positions it to receive the divisions and unloads it from the machine. Stainless steel frame, adjustable rails, sensors to detect case presence.

Centralized electrical panel.

Machine managed by PLC Siemens S7.

Display Siemens TD 200 to control machine functions, the changeover and to visualize possible anomalies.

Centralized installation for air filtering and lubrication.

Air pressure switch for air pressure control.

Safety guards with doors with anodized aluminium frame, lexan panels on top and di-bond panels on bottom, emergency micro-switches included.