Machine suitable to erect the case, to prepare the pack of bottles, to insert card-board divisions on bottles and to insert bottles into the case with the closure of case top and bottom flaps by Hot-melt glue.

Features:

Case magazine adjustable to different sizes.

Case pick-up by an air depression system.

An electro-pneumatic controlled system picks-up the case from the magazine and opens it.

Automatic closure of short flaps with an electro-pneumatically controlled system.

Device for case squaring electro-pneumatically controlled.

Closure of bottom long flaps during the automatic pressure phase.

Glue distribution is done only when machine is moving and at case presence.

Bottom flaps pressure electro-pneumatically controlled.

Bottles conveyor to link the conveyor at Labeller out-feed to the pushing device area.

Bottles pack preparation by a pushing device.

Cardboard divisions magazine with pitch-to-pitch movement.

A carriage with suckers picks-up, opens and inserts the divisions on bottles with a two-axis movement (horizontal and vertical).

An acetal plastic chain bottles conveyor transfers the pack of bottles with divisions to the pick-up area.

A case conveyor complete of stop and selection groups, feeds, positions and un-load the case to the closing area.

A centring group centres and positions the case making product entry easier.

Translation of the head holder carriage with two controlled axis movement: the vertical movement is electro-mechanically controlled; the horizontal one is electro-pneumatically controlled.

Case selection system with electro-pneumatic sensor.

Case advancement system for the top flaps closure, with bars towed by two parallel chains (it allows the transfer of the case to the sealing area to obtain a well squared case) electro-mechanically controlled.

Automatic closure and pressure systems.

Adjustable rails to guide cases.

Safety guards included.

Machine controlled by PLC Siemens S7 with centralized electrical panel.

Machine complying with EC rules.